NEOPARK EPOXI GRIS

DESCRIPTION:EPOXY COATING FOR CONCRETE FLOORS
PROPERTIES:
High mechanical resistance.
Water and oil impermeabil ...

DESCRIPTION:EPOXY COATING FOR CONCRETE FLOORS
PROPERTIES:
High mechanical resistance.
Water and oil impermeability.
It altered by contact with sulfuric, phosphoric, citric acid, caustic soda, oil, gasoline, xylene, .....
Fast hardening:
for pedestrian traffic ............... 12 hours
for light elements traffic ... 2 days
for forklift traffic ............ 4 days
total hardening ...................... 7 days
APPLICATIONS:
NEOPARK is used on concrete floors in cold stores, the food industry, laboratories, mechanical workshops, and in general on industrial concrete floors.
both new and old.
HOW TO USE:
To achieve an optimal result, it will be necessary that:
the surface to be treated is resistant, firm and porous
the surface to be treated is dry, and clean of grease and dust.
Surface Preparation:
Chemical cleaning: open the pore and clean loose debris with the LIMFA product, rinse with water and allow to dry.
Physical cleaning: carry out a brushing using a planer or grinder to remove loose particles and whitewash.
Suction of dust just before applying NEOPARK.
Preparation of the mixture:
NEOPARK comes in two components:
4 parts of base product / 1 part of catalyst.
Mixing must be done in these proportions.
Shake well until you get a uniform mixture,
LET THE MIXTURE REST FOR HALF AN HOUR, and shake again just before application.
If the surface is not very porous, apply a first coat diluted with 30-50% DISOL as a primer.
Apply two coats diluted with 5 - 10% DISOL, allowing a minimum of 8 hours to elapse between coats.
PRECAUTIONS:
Do not apply the product below 15°C and with relative humidity> 80%.
Apply the product by brush or spatula.
Contains epoxy components.
R-36/38 Irritating to eyes and skin.
R-43 May cause sensitization in contact with skin.
S-2 Keep out of the reach of children.
S-28 In case of contact with skin, wash immediately with plenty of water.
Physicochemical characteristics:
Colors: white, red, green, gray
Yield: 5-7 m2 each layer / kg.
Film thickness: 30