INCRUSCAL
DESCRIPTION: DESCALING CLEANER
PROPERTIES:
INCRUSCAL is an acid-based chemical cleaner for the cleaning of calcar ...
Description
Technical details
Logistical Information
About vendor
DESCRIPTION: DESCALING CLEANER
PROPERTIES:
INCRUSCAL is an acid-based chemical cleaner for the cleaning of calcareous incrustations and rust. Contains specific corrosion inhibitors.
APPLICATIONS:
The product is used as a professional descaler in:
Pipes, pumps, heat exchangers, boilers, cooling towers, etc.
HOW TO USE:
Depending on the type and quantity of the scale to be removed, it will be used pure or diluted up to 1/3 in water.
Leave the product to act for several minutes to several hours, depending on the thickness of the incrustation; if possible make a closed circuit.
PRECAUTIONS:
Corrosive. Do not use on limestone surfaces.
Causes burns.
Irritating to the respiratory tract.
Keep out of reach of children.
In case of contact with the eyes, rinse immediately with plenty of water and seek medical advice.
If swallowed, seek medical advice immediately and show him the label.
We recommend wearing gloves for handling.
Physico-chemical properties:
color: purple
odor: pungent, characteristic
pH: 0.01 +/- 0.50
density (kg / lt): 1.120 +/- 0.010
NORMATIVE:
R.D. 770/99 Technical-sanitary regulations for the production, circulation and trade of detergents and cleaners.
R.D. 255/2003 Legal, regulatory and administrative provisions of the Member States regarding the classification, packaging and labeling of HAZARDOUS PREPARATIONS. CLEANING OF BOILERS AND CLOSED CIRCUITS:
1º Calculate the volume of the appliance to be cleaned.
2º Calculate the necessary amount of INCRUS CAL descaler that is going to be necessary. If the thickness of the inlay is 3-5 mm, the recommended ratio would be 1 part INCRUS CAL and 3 parts water.
3º Remove the water that we are going to replace with the INCRUS CAL descaler.
4th Add the descaler to the system that we are going to clean.
It is important for a better performance, not to add the entire amount in a single dose but to add it in parts:
add ¼ of the calculated amount of product and allow 30-60 minutes to elapse
Add another ¼ of descaler and a
Standard (EN, DIN, ISO)
UN3264
Stock availability
On Stock
Incoterm
FCA
FCA delivery address
Avda. del Muelle del Turia, s/n (Valenciaport)
Zip code
46021
Town
Valencia
Stackability
Yes
Especialidades Químicas Neoquim
Description
+
-
DESCRIPTION: DESCALING CLEANER PROPERTIES: INCRUSCAL is an acid-based chemical cleaner for the cleaning of calcareous incrustations and rust. Contains specific corrosion inhibitors. APPLICATIONS: The product is used as a professional descaler in: Pipes, pumps, heat exchangers, boilers, cooling towers, etc. HOW TO USE: Depending on the type and quantity of the scale to be removed, it will be used pure or diluted up to 1/3 in water. Leave the product to act for several minutes to several hours, depending on the thickness of the incrustation; if possible make a closed circuit. PRECAUTIONS: Corrosive. Do not use on limestone surfaces. Causes burns. Irritating to the respiratory tract. Keep out of reach of children. In case of contact with the eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical advice immediately and show him the label. We recommend wearing gloves for handling. Physico-chemical properties: color: purple odor: pungent, characteristic pH: 0.01 +/- 0.50 density (kg / lt): 1.120 +/- 0.010 NORMATIVE: R.D. 770/99 Technical-sanitary regulations for the production, circulation and trade of detergents and cleaners. R.D. 255/2003 Legal, regulatory and administrative provisions of the Member States regarding the classification, packaging and labeling of HAZARDOUS PREPARATIONS. CLEANING OF BOILERS AND CLOSED CIRCUITS: 1º Calculate the volume of the appliance to be cleaned. 2º Calculate the necessary amount of INCRUS CAL descaler that is going to be necessary. If the thickness of the inlay is 3-5 mm, the recommended ratio would be 1 part INCRUS CAL and 3 parts water. 3º Remove the water that we are going to replace with the INCRUS CAL descaler. 4th Add the descaler to the system that we are going to clean. It is important for a better performance, not to add the entire amount in a single dose but to add it in parts: add ¼ of the calculated amount of product and allow 30-60 minutes to elapse Add another ¼ of descaler and a
Technical details
+
-
Standard (EN, DIN, ISO)
UN3264
Logistical Information
+
-
Stock availability
On Stock
Incoterm
FCA
FCA delivery address
Avda. del Muelle del Turia, s/n (Valenciaport)
Zip code
46021
Town
Valencia
Stackability
Yes
About vendor
+
-