RADIASELL 200ML

PERMANENT SEALANT FOR RADIATORS
Radiasell is a highly concentrated product specifically designed to permanently seal ...

PERMANENT SEALANT FOR RADIATORS
Radiasell is a highly concentrated product specifically designed to permanently seal leaks quickly and efficiently.
Thanks to its high content of heat activatable metal and ceramic particles, Radiasell provides a permanent seal on the metal surfaces that make up the entire cooling circuit. Thus, it repairs leaks in cylinder head gaskets, leaks in block plugs, pores in the radiator or leaks in the water pump.
Radiasell withstands high pressures and is not lost in case of replacement of the refrigerant.
Radiasell is formulated with an optimal dispersant ratio that prevents clogging.
Fully compatible with most antifreeze formulations used in the automotive industry.
It does not attack joints or rubbers.
Radiasell is not suitable for sleeve sealing.
HOW TO USE
Initially, start the engine and allow it to warm up slightly.
Then, with the engine off and slightly warm, add Radiasell to the expansion tank or directly to the radiator. (It is necessary to shake the container vigorously for at least 30 seconds before adding its contents).
Next, start the engine and drive the vehicle for about 50 kilometers or 30 minutes, after which the leak will have been repaired by Radiasell.
Finally, with the engine completely cool, adjust the coolant levels in the system.
Dosage:
A 200 mL container can treat a circuit of up to 56 liters.
In the case of larger cooling circuits, use a proportional dosage using the following equation:
Radiasell Volume (mL) = 3.57 x Refrigeration Circuit Volume (Liters)
PHYSICAL-CHEMICAL CHARACTERISTICS
Appearance / Viscous copper-colored liquid
pH / 10.4 ± 0.5
Dosage A 200 mL container treats a circuit of up to 56 L
200 mL metal container.